1. MMC
Electronics.
With variable speed pre-selection, smooth start-up, safety brake and overload
protection the MMC electronics minimise
working stress and adapt machine performance to
the working material. |
2. FastFix
saw blade changing system.
Rapid blade changes with a
convenient saw blade changing system that saves you time
and money. |
3. Convenient operation.
The guard release
is integrated in the two-stage switch and can be operated
by both right and left-handers. The same applies
for the safety switch-on lock. |
4. Dust
extraction.
The KAPEX is fitted with an
extraction connector and an
efficient chip deflector funnel: the
chips are extracted directly where they are produced. |
5. Settings accurate
to the millimetre.
Fine adjuster operated from the front, for precise cutting angles. Make complex cuts in no
time at all. |
6. Precision grooving.
Cut
accurate grooves with the stepless trenching depth adjuster: simply actuate the lever, set the trenching depth with a single
turn and start
working... Intelligent. |
7. Secure
workpiece support surface.
The large sliding quick-release fences allow the accurate positioning of workpieces
in their 'original wall position' and the attachment of self-manufactured positioning supports. |
8. Precision dual-line laser.
Irrespective
of whether you
position the workpiece from the left or right, the laser lines will always show the exact width of the cut
and make your work easier as a result. |
9. Robust
and stable.
The KAPEX was designed for tough industrial applications. The large magnesium diecast base with rubber
feet provides
maximum stability. |
10. Easy-to-read
scales.
The easy-to-read scales are
abrasion-resistant, the
pointer can also be adjusted.
The rotary
base has a 60°
range and is adjusted via the convenient clamp lever. |
11. Easy transportation.
Transport
safety device, clamp, cable holder, well designed hand grips and 21.5 kg in weight - the KAPEX is ideal for mobile applications. |
12. Bevel included.
Transfer interior and
exterior angles precisely from the workpiece to your KAPEX using
the bevel. |
13. Intelligent
base height.
The KAPEX saw base is the
same height as the SYSTAINER SYS 1, which can be used to support long
workpieces when working on the floor. |
14. 120 mm cutting
depth.
The unique special cutting position on the KAPEX allows you to cut strip material with a maximum height
of 120 mm quickly, safely and accurately. |
15. Space-saving
precision design.
The innovative twin-column guide holds the saw blade in position with even greater accuracy
and excludes com-ponents protruding from the rear. |
16. Rapid
clamping.
The tilt angle is easy to adjust from the front. Simply detach the quick-release clamp, set the angle
and lock - it couldn't
be easier... |
17. No dangerous
obstacles.
The cable holder keeps your workplace tidy and eliminates
dangerous obstacles when you
transport the machine. |
|
